Congratulations on your purchase of the DLO HomeDock for Zune with On-TV Navigation, the dock that lets you enjoy your Zunes music, video, photos, radio and community in your living room. Connecting HomeDock to your home entertainment center is a snap. Well get you started in four easy steps.

For On-TV Navigation of your Zune youll have to set the tv out setting on the Zune itself. To do this, simply go to settings on the Zunes Main Menu (you may do this manually using the Zunes Control Pad or with the HomeDocks Remote Control). Under settings select display and then select tv out: off. When you see a pop-up window, just hit the Enter/OK Button on your HomeDock Remote or on the Zune Control Pad. Your Zunes interface should now appear on your television screen.

The most accurate and reliable solution for the iPhone, MotionX-GPS embeds the functionality of an advanced handheld GPS unit into a simple and intuitive iPhone application.

Use MotionX-GPS with your iPhone 3G or 3GS to track outdoor activities such as hiking, running, biking, sailing, skiing, or any other activity where you want to track your route. The application is also ideal for geocaching enthusiasts. Its an easy to use, fullfeatured application and provides the ability to share the coordinates of your favorite locations or geocaches with others.

MotionX-GPS is exclusively designed and optimized for the iPhone 3G and 3GS. The first generation iPhone and the iPod touch do not have the necessary GPS chipset to acquire a GPS signal.

GPS requires a direct “line-of-sight” to communicate with satellites. Your iPhone 3G or 3GS must have a clear view of the sky to locate at least three satellites in order to give accurate position information. If you are indoors, in a wooded area or surrounded by buildings, you may be unable to acquire an accurate signal.

The tutorials describe the way about ripping DVD to Zune video (MP4, MPEG-4, H.264) and Zune audio (MP3), and converting all popular movie files to Zune with only one program. The Zune converter software is easy to use, works flawlessly. Super fast conversion speed with high quality plus chapter/segment ripping modes give you everything you need to put DVD/video on Zune. Before convert DVD to Zune or convert AVI, WMV, MPEG, RM, Divx, MOV, XviD, RMVB, DVR-MS, ASF, MPG to Zune, lets check the format limitations which the Zune plays.

If youd like to record from certain time point, or want to change some parameters like output format, video bitrate, frame rate, audio bitrate, please click No button to close the window.

The default output format is Zune MP4 video. If youd like to change this, click Advance button, set the output format to Zune video (Zune MP4, Zune H.264, Zune TV) or Zune audio (MP3). Here, you can also set video size, frame rate and more.

Lock the phone To lock the phone and prevent it from dialling accidentally: press the power button on the top. The screen will deactivate and you will hear a click. In this mode, the screen will not respond to input. The buttons however are still functional.

Power off the phone Press and hold the power button for approx 5 seconds, then slide the red arrow to the right. To power on again, hold power button for a few seconds until the Apple logo appears.

Before using your iPhone it must first be activated via iTunes. This will configure it for use on your mobile phone network. This is telling you that your battery is too low to continue using your device. Plug it into the charger and it will change to the screen below and you can continue to operate.

This Quick Start guide tells you how to set up your iPhone and use its key features. Once you’re up and calling, you can learn even more about iPhone. Connect your iPhone to the USB port on your computer. When iPhone is connected, iTunes opens and guides you through setup. Select the contacts, calendars, music, videos, and photos you’d like to sync, then click Apply in the lower-right corner.

To turn iPhone on, firmly press the On/Off button. To turn off or restart iPhone, hold down the On/Off button, then slide to confirm. To put iPhone in sleep mode, press the On/Off button once. This turns off the screen but still allows iPhone to receive calls. To silence an incoming call, press once. To send a call directly to voicemail, press twice.

Acquiring satellite signals may take a few minutes. The bars indicate GPS satellite strength. When one bar is green, the nüvi has acquired satellite signals. Now you can select a destination and navigate to it.

Your route is marked with a magenta line. As you travel, your nüvi guides you to your destination with voice prompts, arrows on the map, and directions at the top of the map. If you depart from the original route, your nüvi recalculates the route and provides new directions. Touch and drag the map to view a different area of the map. A speed limit icon could appear as you travel on major roadways.

The FM traffic receiver, which is integrated in the vehicle power cable, is included in some nüvi packages. The traffic receiver and the nüvi must be in data range of an FM station transmitting TMC (Traffic Message Channel) data to receive traffic information.

The Nokia 3120 phone provides many functions which are practical for daily use, such as Calendar, Clock, Alarm clock, Profiles, and many more. Also a range of Xpress-onTM covers are available for your phone.

The phone is able to send multimedia messages made up of text and a picture, and to receive messages containing text, pictures and sounds. You can save the pictures and sounds for personalising your phone.

Polyphonic sound consists of several sound components played at the same time like a real melody through a speaker. Polyphonic sounds are used in ringing tones and message alert tones. Your phone has sound components from over 40 instruments that can be used for polyphonic sounds but the phone can play four instruments simultaneously. The phone supports the Scalable Polyphonic MIDI (SP-MIDI) format.

First of all, those attempting to connect their Xbox 360 to the PC will need to install the Rollup 2 update in MCE2005 and download the software from the URL the Xbox 360 brings up when trying to connect. If you’re using Windows Firewall, you don’t need to turn it off, as it will adjust itself automatically. Actually, just don’t turn it off, period! If you’re using a 3rd party firewall, click here for a solution.

Steps1. Be sure your 360 isn’t paired up with any other PC. To do this, go to your 360 dashboard and browse to the System blade, then Computers. Disconnect from any computers listed there.2. Boot your Windows Vista PC up and leave it sitting on the desktop.3. On your 360, browse to the “Media Blade” and select “Windows Media Center”. Alternatively, press the green MCE button if you have a remote.4. You will be presented with an 8 digit number. Write it down or memorize it, and go back to your PC.