iMac G5 Panel Display Bezel Replacement Instruction Manual
These instructions cover the iMac G5 (20-inch) models. The models may look slightly different from one shown in the illustration; however, the following procedure applies to both models.
Locate the three silver case screws circled below. You may have to lift the stand to locate the middle case screw. Note: These screws are captive; they are part of the display/bezel assembly and cannot be removed. Using the tool provided, or a Phillips #2 screwdriver, loosen the three captive screws. Turn the screws to the left until they stop turning. Don’t force the screws once they stop turning.
To access the display/bezel assembly you must first remove other service modules. This procedure will show you how to remove and replace these modules. Note: As you remove each module, set it aside, along with the screws for that module. 2.Ground yourself. Touch the metal surface (as shown below) on the inside of the computer to discharge any static electricity. Warning: Always discharge static electricity before you touch any parts or install any components inside the computer. To avoid generating static electricity, do not walk around the room until you have finished installing the part and closed the computer.
Download PDF Manual iMac G5 Panel Display Bezel Replacement Instruction
Related PDF Manuals:
- Dell Latitude D505 Series Service Manual
- Dell Latitude 100L Service Manual PDF
- iMac G5 Repair Extension Program for Video and Power Issues
- Cooling Module Replacement Guide Toshiba Satellite 1005-S157 Manual
- Repairing Apple iMac G5 Motherboards Manual
- iMac G5 Manual Users Guide
- Ford Mustang Throttle Body Spacers Installation Instructions Manual
- iMac G5 Technical Specifications Manual PDF
January 17th, 2009 | by pdf manuals |